Lanber deluxe sporter shotgun review

About our feeds

From guns and gundogs to the latest shooting news; the complete online network for the British shooting community.

Home
Guns

| Next

Lanber de luxe sporter shotgun review

The makers have made a bold decision to colour harden the action - with great results.

By Jason Harris

Thursday, 06 September 2007

Lanber de luxe sporter shotgun: This deluxe Sporter from Lanber is a good-looking basic shotgun, with an improved finish.

Lanber de luxe sporter shotgun review.
Some years back the Spanish-made Lanber was voted one of the most popular first time buys among people coming into the sport.

It wouldn't surprise me to hear that this is still the case.

If the gun has slipped from pole position in the meantime then the latest version to hit the gun shelves should help it regain the title.

With one or two exceptions the new deluxe Sporter is pretty much the same mechanically as its predecessor. But it looks altogether different.

This is thanks to a bold move by the makers to colour harden the action, change the engraving pattern and run with gold inlaid game birds on both sides of the frame. Against the dark coloured hardening this gold work really does come to life.

Simple mechanics
As I say, the gun's insides haven't changed much with the hammers - suspended from the top of the action frame - still being powered by coil springs. In this mechanism the hammers do not rebound on firing but the strikers retract to allow the gun to open easily when the top lever is activated - a cam simply pushes the hammers back as you open the gun.

The trigger mechanism works along the same lines as a Browning/Miroku with a spring loaded connector coming up from the trigger to meet, and pick up, each sear in turn. Re-set for the second barrel is done by inertia from the first shot. Re-cocking is achieved via independent rods running through the floor of the action frame which are pushed rearward by a cam in the fore-end iron when the gun starts to open. These cocking levers also pick up the ejector work after the gun has been fired.

As in previous guns the barrels are still made on the monoblock principle and the tubes have been built to standard diameters with no hint of back-boring.

The top rib has been machined with a central channel and is slightly tapered along its length to not only reduce weight but, more importantly, give an excellent sight picture and pointability. In fact the design of the rib gives the illusion the barrels are slightly longer than they actually are.

To ensure this gun is as versatile as possible the makers have fitted the barrels with 3in (76mm) magnum proofed chambers and stayed true to their usual flush-fitting multichoke system. Five tubes and a key are supplied - along with an ABS travel case - as standard.

Quality finish for the price
Until recently Lanber used to oil finish the woodwork on this gun but now it has been replaced with a light varnish or lacquered finish. I think an oil finish is probably the most appealing and durable but this finish looks good and does give the gun a good level of protection.

Overall wood quality is as good as I would expect on a gun of this price - in fact I've seen worse on guns costing far more money!

One point worth highlighting here is the stub pins, around which the gun hinges, are now replaceable. It has never been a problem to tighten a loose Lanber in the past, but this useful feature will enhance the longevity of the gun and make the gunsmith's work even easier. It seems very much an improvement inspired by Beretta.

Hardly surprising, as most will know the Lanber is distributed by GMK, who also distribute Beretta.

JASON'S VERDICT:

For a new shooter starting in the sport or someone in need of an all round second gun, this Lanber offers solid value for money.

It handles and points well, comes to the shoulder smoothly and should prove every bit as reliable as the guns that went before it. What more could you ask for the money?

Build Quality: 8

Handling: 7

Styling: 8

Value for money: 9

More information from the importers - GMK Ltd of Fareham, Hants. Telephone 01489 579999